Price range: 359,00 € through 895,00 €
The aluminum alloy, reference 5086, used for the manufacture of wishbones, masts, and extensions, was chosen because it is best suited to resist corrosion in a marine environment. To further enhance this corrosion resistance, all tubes are anodized inside and out, with a thickness of 7µ. Wishbones.
Tube diameter 25 mm for children’s sails: 1.50 m², 2.00 m², and 2.50 m² Tube diameter 28 mm for junior sails: 3.00 m², 3.50 m², 4.00 m², and 4.50 m² Tube diameter 30 mm for adult or heavier junior sails: 5 m² and 6 m² sails.
All wishbones are equipped with a front lever handle featuring non-slip pads and mast protection. They are all covered with glued foam sleeves. The rear end includes a cleat and two pulleys. Masts. Each section of all masts is fitted with end caps. On aluminum masts, the area where the wishbone is attached is knurled for a non-slip grip. Aluminum masts marked 36/32 mm are built with a lower section of 36 mm diameter and an upper section of 32 mm diameter, providing a smooth curve and reducing tension on the sail’s luff.
They are available in: 32/28, 36/32, 40/36, and, for three-piece masts, 40/36/32 mm. Masts referred to as “alu/fiber” have a lower section of 40 mm aluminum and an upper section of 36 mm glass-epoxy composite, designed to better absorb flex, particularly for sails used at spots with some shore break. For the 3.5 m² rig: Aluminum mast 40/36/32, length 3.85 m; wishbone 28, length 1.45 m.
With specific reinforcements, the Nautix X-Move Dacron sail range is particularly suited for intensive use, such as in sailing schools. Stable and easy to handle, they will accompany you from your first steps to your first planing sessions. The new Junior 4 m and RDM 3.15 m and 3.70 m fiber masts give beginners a better feel for the wind while easily absorbing gusts.
| Weight | N/A |
|---|
